Re: How to have Edison reconnect to WiFi automatically?
Hi toadaze,What about the “auto wlan0" line under “#wireless interfaces” when you type /etc/network/interfaces.Regards Sergio
View ArticleClik here to view.
Re: i2c communication pin-outs?
faceplant, The Edison Arduino IDE I2C defaults to I2C-6; to invoke I2C-1 also a small change is required in the appropriate library function. Maybe you figured this out. On the MPU9x50 sensors, you...
View ArticleRe: Response Requested: What's in your Edison HDK?
I think the microPEM SMTSO standoffs are usable.http://www.pemnet.com/fastening_products/pdf/mpfdata.pdfThe standoffs are on page MPF-7. I did not check if the diameter is ok.
View ArticleRe: how to register new snmp oid on galileo?
Hi Marss, I'm not familiar with that, so I'm not sure if I am understanding all the details. The communication between the Galileo board and the Android device is through network, right? Make sure both...
View ArticleRe: Divorce from Adapters: Taking the Custom "Block" Plunge
So you did not add the debug serial to you board ?FWIW, are you aware of this GPS module. https://www.sparkfun.com/products/10890 I have made many GPS enabled devices and this one has been by far the...
View ArticleRe: What is the difference between i3, i5 and i7 processors?
The i3-380M is a first generation Intel® Core processor.
View ArticleRe: Board DP67BG shows code 37, No beep errors
of course, no support by intel, what a surprise
View ArticleRe: Core i7 4790k @ Noctua NH-D15 & GA-Z97X-G1 overvoltaging by motherboard,...
Hmm, but You meant chipset, right? Because it works just fine on my ASUS motherboard.
View ArticleRe: HD4600 - Random Cut to Black
Does it work properly when connecting the TV directly, bypassing the AVR?I would suggest using a different HDMI cable if possible, quality may be a suspect.This is just one of the available options:...
View ArticleRe: Intel® Wireless-N 7260 - slows
Hey MichaelWDarlington - not that it matters too much as we know this is related to the intel card but I noticed you have the same new Asus laptop that I just purchased as well Did you see my earlier...
View ArticleRe: HD4600 - Random Cut to Black
The HDMI cable is of good quality. I have tested the cable with another source and it's fine.Same issue occurs when connected directly to the TV.This issue does not occur when using any other device...
View ArticleClik here to view.
Re: Web Browser
hi mhahn, yes wget did my intended work .I am a bit new to the linux coding hence not too aware of the packages. Thanks -Paridhi
View ArticleRe: Divorce from Adapters: Taking the Custom "Block" Plunge
The schematics for the Arduino board and the Mini-Breakout board are available at Software & Documentation. Here's a direct URL for the schematic for the Mini-Breakout board:...
View ArticleRe: Intel® HD Graphics Driver for Windows* 7/8/8.1 version 15.33.30.3958...
As realflow100 Mentions, developers at Mojang identified an issue in Intel HD4000 that causes flickering in Minecraft, the official bug tracker page is below. [MC-58760] Screen flickering by broken...
View ArticleRe: Intel RST (Windows application) not offering to preserve data when...
Hi Joe, I've attached both files. The drives I want to RAID are labelled Drive 1 and Drive 2 in Disk Management (the 1.8TB drives). Thanks for your patience on this!
View ArticleRe: Divorce from Adapters: Taking the Custom "Block" Plunge
One can "learn by example" by looking at the schematics for the existing boards, but it would be nice to actually have some information on the PMIC. Is there any documentation on the PMIC? I've...
View ArticleIntel Edison Camera Module
Hi, I am trying to create a wearable low-resolution personal security camera using Intel Edison.My goal is to get real-time video between 10-15FPS I was wondering which interface (SPI, CSI, USB, etc)...
View ArticleUse an USB2AX on Galileo G2 (ttyACMx) device?
I have been playing around with both Intel Edison's and a Intel Galileo G2 and was seeing about if I could get the same sketch to work on the Galileo that I now have running on the Edison. I am using...
View ArticleRe: Is the Serial2 port really working?
Hi Yisus, Are you using the latest image on the Galileo board? If I recall correctly, the earlier versions didn't had Serial2 fully hooked up to work in the Arduino environment, but it should work in...
View ArticleRe: Is the Serial2 port really working?
Hmm... well... just saw another post talking about the serial port configuration, and it seems like you can't do it with Serial2.begin(). What I'm afraid of is that Serial2 is normally the console, but...
View Article