Re: OneWire/DS18B20 Sensors on Node.js/mraa for the Edison.
Thanks, but my target are these steps for kernel building - similar like this:Native Edison kernel compile successful, kernel hangs without error I don't use the Yocto image, it's not my thing and i...
View ArticleClik here to view.
Re: Edison w/ Arduino Expansion board no longer boot with 12V supply
Hi Brew76 I am in the same position as you do you have any news with your new board?thanksCarlo
View Articlehas the centrino 6150/6250 variant been ditched?
I was just looking at the Intel wireless SW and drivers and noticed that for some reason, since 16.11 and going until even the (development?) 17.13.0.9 version, the 6150 and 6250 seem to be the only...
View ArticleRe: Can´t Remove Motherboard on Nuc D34010WYK
I have the same problem, did to solve it?
View ArticleRe: D34010WYK issue with USB 3.0 HD
I recently spend some time figuring out this problem and can confirm that - in my case - the following BIOS setting (I'm running BIOS 0030) fixes the problem of the drives not being detected by the...
View ArticleRe: How best proceed with overheating i7-4790K?
ShadiElwan, It's your processor so you can choose what you want to do, but if it was me, I would NOT be satisfied with a chip running in 90C-100C on stock settings even with a stock cooler. When Intel...
View ArticleRe: D34010WYK does neither boot from USB 3.0 nor boots with plugged USB 3.0...
I recently encountered the problem of my USB 3.0 drives not being detected after a cold boot until I restart the system once. I was able to fix this issue and other USB issues I had with my NUC by...
View ArticleRe: D54250WYK fails to present HDMI output upon wakeup
I have the same adapter and had the same issue. You can solve it temporarily by connecting the adapter to a USB 2.0 hub, then connect the hub to the NUC. Then, update your BIOS to the newest version...
View ArticleRe: Use an USB2AX on Galileo G2 (ttyACMx) device?
Maybe I am missing something, like what capabilities the server mode USB has and if there is anything I need to do enable things. Today I tried a few different things, like I updated to Alex'T s...
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
karwos, When running your program, I'm not clear about the results. What does it mean when I'm not getting any special characters and only "."? Is this a good thing or a bad thing? With the previous...
View Articlei7 4790k High Temps at Stock
Hi everyone, I just finished throwing together my rig, and I am hitting 70c just from running intel burn test at medium settings with the clock set to 4ghz locked and turbo off. I haven't touched the...
View ArticleClik here to view.
Re: My new 6 Gb/s HDD shows up as Generation 2 in Intel Rapid Storage...
Thanks for helping me with this, I guess I'm stuck at 3Gb/s with this laptop. It still does a good job for what it is and I really have no complaints with the drive, I just wanted to get everything...
View ArticleRe: Galileo Debian v1.2 image
As I was having issues with Yocto not seeing my devices on the USB on my Galileo G2, I thought I would try out the Debian build. Thanks!Took two attempts, the first one downloaded the 1.0... build,...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
Yes, it's the same kernel. It's built using bitbake in the Yocto environment, and then copied to the Debian image or system.So if it's a kernel driver that's missing, you'll need to build the kernel...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
u-boot on Edison expects vmlinuz (not vmlinux) to be present in the vfat boot partition (partition 7). NOT bzImage in the /boot folder in the ext4 partition, which is entiretly redundant. Why that's...
View ArticleBricked Board
How do I determine if my board is bricked? Here is my situation. I am trying to telnet into it so I can start working with Motion, and I was unable to connect over Ethernet. I then decided to just run...
View ArticleRe: HP 2740p cannot Install Widi software, meet all requirements...
Hello Jay,I had the same problem before, although my laptop-hardware meets all conditions I had this problem.My issue was a second graphic card (HD 4000 integrated plus NVIDIA GTX 675 m). I shut down...
View Article2 core 2 thread and 1 core 2 threads
If 2 core 2 thread and 1 core 2 threads. which s best (fast) ? Sorry my bad English and silly question. I don't understand about thread correctly
View ArticleMy Intel Edison project
I have recently bought an Intel Edison with the Arduino compatible breakout board. I am planning to use this for an universal translator project. Something like this:...
View ArticleIntel Galileo - Can't upload sketch while boot from Big Linux Image
HI there, I'm new to Ardiuno in general and I'm a bit confused as to how this is all supposed to work. I've got a Galileo - it came with Windows. I've gone to the Software Downloads page and downloaded...
View Article