Clik here to view.
Re: NUC DN2820FYKH: WARNING: Processor thermal trip at boot
this is not acceptable. i am calling Intel to solve this problem. You got examples for non working units, so give us a hint what´s wrong. silence is not an option in this case.
View ArticleRe: Intel HD 4000 Graphics HELP
Thanks for joining the Graphics community. For driver download please go here: Intel® Download CenterPlease filter by operating system and try to install the driver when it finishes downloading, to...
View ArticleRe: recover the data on the RAID 10 volume
Hi Allan, Do you know what action may trigger the RAID controller to mark all the disk as offline? I only change the SATA data cable to different SATA port on the same motherboard on the same Intel...
View ArticleRe: D34010wyk problems with flash video
Let me help you with this. I would like to get more information about your system configuration so I can have a clear picture of the issue. Can you please provide your dxdiag report here?How to get...
View ArticleRe: Intel HD Graphics with HDMI Over Cat6
Hi Ross Could you please provide the following information? 1, What OS are you using?2, How ling of CAT6 run is it?3, What brand/model of HDMI extender are you using?4, Does the Vivo and display work...
View ArticleRe: The Arduino IDE 1.5.3 for Galileo doesn't work on windows 7 x86 (IT)
Hi vinciolo, I think the issue happens because the OS should be in English, but I'm not talking about change the display language, I mean the OS has to be the English version. I'll recommend you to...
View ArticleRe: How to enable PIN0/PIN1 for UART usage (TX/RX)
Hi Wenlong, The following commands should set up the correct pin multiplexing to enable serial mode on Pins 0 an 1. The key part is the echo of 'mode1' into 'current_pinmux', as that sets the pins...
View ArticleRe: Intel HD 4000 Graphics HELP
Yeah i tried downloading the driver from the intel download center but it wont accept it. Is it really like this when you have a integrated graphic card? Also, is it possible to update my Intel HD 4000...
View ArticleRe: Audio via I2S on edison
we're for now breadboarding our own codec to the edison.Codec we use is the TLV320AIC3104.When this works, we'll create the board.
View ArticleRe: wpa_supplicant keeps crashing
Hi corysurf I’d say you could try by editing the /etc/network/interfaces and set in there your wireless configuration. For example you can delete the line that says "wpa-conf /etc/wpa_supplicant.conf"...
View ArticleClik here to view.
Re: GPIO usage in bash
Hi shb, I'll recommend you to check this post: Mapping for digital and analog Arduino pins. I think you might find it very helpful. Check it and let us know if this answered your question. Have a nice...
View ArticleRe: Problems with installing and running Bluetooth
From your phone, are you trying to transfer a file or something? Other than file transfer or transfer contacts, there is nothing else you can do between PC and phone over BT. Looks like you have...
View ArticleRe: display driver intel graphics accelerator drivers for windows 7(R)...
Okay, I did everything you said except I click the kit64ics file since there's no igdlh64.inf or igdlh.inf file under my Graphics sub-folder. Here's my updated dxdiag after I installed the driver. Is...
View ArticleRe: Problems with installing and running Bluetooth
On my Android phone I go to settings > Bluetooth, and there I can see all paired devices. When a device gets connected the name of the device turns blue, and it will say connected. That doesn't...
View ArticleRe: Edison boot into single-user mode?
Thanks JPMonteiro. That would be a very handy thing to have. Most Unix devices going back to early Sun workstations had boot into single user mode. It comes in handy if there's a regular startup...
View ArticleRe: Intel updates in the form of catalog to use with WSUS
Hello, Jagan - Although individual divisions within Intel may come out with catalogs (network adapters, video drivers, RAID drivers), there does not appear to be any method to collect all the...
View ArticleRe: Edison boot into single-user mode?
Thanks mhahn. Grub commands don't seem to match uboot. I tried lots of variations including 'single' as well as 'run bootcmd single' and various forms of -s, s, single, 1, and -1). None of them worked....
View ArticleRe: Edison opkg package repo created
First off, I think what AlexT is doing is great! But, being used to apt-get on Debian systems, I have a question on Apache2/PHP To set this up, I normally do a "apt-get install apache2 php5...
View ArticleRe: How best proceed with overheating i7-4790K?
@TAS3086You mean 77 Amps or Watt?Also 80c peak is better than mine 100c!
View ArticleRe: Missing configure_edison?
Hi MakerMichael, Why don’t you try flashing your board using an alternate method? At the bottom of this page https://communities.intel.com/docs/DOC-23193 you will find an “Alternate Flashing Method”....
View Article