Clik here to view.
Re: How to flash a bricked Edison Mini-BreakOut Board?
Ok, finally I got it solved! The key is just to use a "good" USB cable - that's all! I tried three cables from the same brand, all had shown the same problem. But finally I've tried another one from...
View ArticleRe: Fried my Edison on the mini breakout...
I was supplying it 12V. What I should've done is limited the current... Sigh, costly mistake. Luckily, I participated in an IoT hackathon recently and have another board albeit the Arduino version. So...
View ArticleRe: Edison Mini Breakout Board Battery
Glad to hear you got it working again. Removing a QFN package with a soldering iron is not easy, but it should just pop off with a heat gun. I just got my breakout board today. It's a pretty nice...
View ArticleRe: Sharing information about compiling Edison OS with Yocto.
I solved the problem with the flashall.sh script. I should have realized this sooner, since I've run into this problem with dfu-util several times in the past! It turns out that I needed to run the...
View ArticleRe: Let's make pps_gpio work on Quark/Galileo
gigneil gigneil, LDiego_Int Good news, after working on this for a while, I finally got a breakthrough and I'm now able to get a PPS GPIO interrupt working in connecting an Adafruit Ultimate GPS logger...
View ArticleDisplay Port has video, but no sound
NUC - D54250wykMonitor - Asus VE 278 When I attach a display port cable I get video, but no sound. Troubleshooter reports no input found
View ArticleD54250WYKH drops connections like every hour for a few seconds (network,...
Good day, As the topic says. I have the newest drivers and no other issues. Windows 8.1. The problem is appearing repeating with about an hour in between, it drops connections for a few seconds, maybe...
View ArticleRe: Audio via I2S on edison
Just adding myself as another person looking for the same information. There seems to be very little info on using the i2s features of this module. Someone posted a link to this document which has...
View ArticleRe: Intel Edison GPIO Pin Multiplexing Guide
First - Thanks very much for this! It's been hard to find documentation so far and this is incredibly helpful. If I may be so greedy, do you have any other information on how to setup spi vs i2s? I'm...
View ArticleClik here to view.
Support for the Adafruit 2.8" TFT display for Arduino Edison
I am not sure how many others will be interested, but I thought it would be fun to be able to use one of the Adafruit 2.8" TFT displays that uses SPI to communicate. It also has a touch screen which...
View ArticleRe: INTEL DESKTOP DG41WV
Well, I just reflahed it with a "bios file" ( 2MB size) that I found on the net and worked like a champ!! This problem is solved!! thanks!!
View ArticleRe: Virtual memory is @ 100% if i run a game at a different resolution than...
Except apparently this doesn't fix the problem completely (as many others have stated) There are also people on the MS forums still having issues too!
View ArticleRe: How to use SD card
I'll report back on this later next week. In the distant past I have written programs in C and run them on an Arduino, including reading and writing to disk files. I never tried a SD card back then,...
View ArticleRe: Simple Webserver
Found a work around by changing the port number in the Arduino sketch, so that its not on the same port as the server running the Device Information page.. Now have it working..
View ArticleDoes DZ77GA-70K offer RAID with onboard Marvell 88SE9172
I'd like to configure a RAID 0 with the on-board Marvell 88SE9172 (grey SATA ports). Via link from DZ77GA-70K motherboard's intel site page I can get to page Desktop Boards — Configuring Your Computer...
View ArticleRe: Edison wifi delay and power saving
I looked all over for an appropriate '.conf' file, but to no avail. As a last resort, one can always create a service script that turns power management off at boot. Try the following: make a file...
View Articlelogin into galileo with tokor's prebuilt eglibc image
hello all, I wanted to install opencv and gcc on my galileo and tried a lot building a linux iimage.. but I am getting too many errors .. so I decided to move ahead with tokor's prebuilt eglibc images...
View ArticleRe: login into galileo with tokor's prebuilt eglibc image
Above is said, because I don't have a proper cables right now to connect it to the monitor directly. --Paridhi
View Article