Re: Installing and running LUA on my Edison - Beginner questions
Deium, Kurt,Thanks for the prompt and good advice. This is what I have just tried :- root@Tesla:/lua-5.2.3/src# echo...
View ArticleClik here to view.
Re: BCM43340 Programmer's Guide
Kudzu,Unless I am corrected, this is not an open source platform when it comes to the hardware. There is an Arduino compatibility, and the software (linux os) may be open source.Intel® Edison...
View ArticleRe: Proper circuit for Edison Arduino 10A PWM
I would use a MOSFET gate driver with such a large MOSFET. place the gatedriver close to the MOSFET, use 0.1uF decoupling capacitor across the driver power pins and connect GND for the driver as near...
View ArticleRe: Skyrim smooth graphics 15-40 FPS with D54250WYKH
Thanks for joining the Graphics community. Thanks for sharing your results. I am sure your feedback will provide help to other community members. Allan.
View ArticleRe: Can i use Edison For Taximeter Project ??
Hello M.Motahari, You can find all tested shield in here: Intel® Download Center, I will also attach some links that could help you in this project:Adafruit Ultimate GPSUsing intel edison development...
View ArticleRe: Galileo GEN2 support - linux yocto build
Diego, Seasons greetings from Ireland. yes, I realise the pins and HW are different. I had a look at the emutex page, and parsed the source code for the arduino IDE. Now I think I havea good grasp of...
View ArticleRe: Triple monitors not working with Intel HD 4000 on Lat E6430
Hello s60088g, Please note that when using HD 4000 it is must to have two DP outputs or monitors and then either WiDi, VGA, DVI, HDMI or embedded display to have the 3 display configuration. At this...
View ArticleRe: Can't Update Dell Latitude E4310 to Generic Intel Drivers
Hello Tobywankenobe, I would like to explain you that Original Equipment manufacturer systems (OEM) sometimes does not allow the installation of generic drivers, therefore customer are force to...
View ArticleRe: Triple monitors not working with Intel HD 4000 on Lat E6430
So then are you saying that even though I do have multiple ports on my laptop, VGA & HDMI, I cannot have multiple monitors simply because of of the graphic card type?
View ArticleRe: Not able to read "/dev/ttyMFD1" using serialport module in Intel XDK
Hi CMata_Intel, I tried a lot but i gave up . Currenlty i wrote a server code in C++ and trying to connect it through Arduino.But it is giving a lot of lag on Edison as all are blocking assignments. I...
View ArticleRe: How to update MFSYS25V2 to 10.18 firmware
Since yours is at 11.6, you can directly upgrade to 10.18 without any problems, which precisely complies with the "system must be at firmware level V10.x prior to starting this update" wording.
View ArticleClik here to view.
Re: Portable Intel NUC
PVP, thanks a lot for the feedback, I’m going to share this information with the corresponding teamRegards,
View ArticleRe: NUC electric on the surface
I suspect there is something either there or at the NUC power supply stick. But how do you check it without touching?
View ArticleRe: Edison Ethernet.localIP() function
Hi AlphaCHarly I got confused. If you are using the embedded Edison's WiFi, what exactly is the question you have regarding the Ethernet.localIP() function on Edison? If you want to use the embedded...
View ArticleRe: SSD DC P3700 not found
Where did you get the "Intel driver" for Linux in the first place?Intel® Download CenterThe only Intel driver I can see at the Download Center is meant for Windows only, for Linux you are supposed to...
View ArticleRe: TI SNB9024 power management IC Data Sheet
Hi mweal; I can't get the datasheet either, it can be under review or maybe is not available. Have you tried to contact their support (TI) and ask for the datasheet? Regards;CMata
View ArticleBios acces impossible
I can'treinstall my Nuc (nuc d54250wyk bios ver30) becauseit's impossiblefor me to enter into the bios.I tried everything.Any suggestion ?
View ArticleRe: Some Graphics 5200 architecture configuration problems
Thanks for the feedback Merlion. I’m going to provide this information to the corresponding department. Regarding your questions, I’m going to try to get that information for you.I’ll keep you posted.
View ArticleRe: About the startup of the edison
Hi SeanMA, The Edison will start the booting process automatically when it is powered up, regardless if the power is supplied by the USB or by an external power supply. It's not possible to avoid the...
View ArticleRe: gaileo gen 2 bricked after trying to use external power supply
Hi sergio85, As I understand from your post you want to power both the Galileo and the Roomba iRobot from the same battery supply you listed right? Take a look at this link...
View Article