Clik here to view.
Re: How to get I2C commo using Edison Arduino breakout board?
Thanks, I got the I2C to "work" using A4/A5. Not sure why SDA/SCL on the digital pin jumper doesn't work. I can read the I2C address of the sensor most of the time, but often it still reports no I2C...
View ArticleRe: The right power supply for Edison module+Arduino board
Yes, that plug looks correct, and 1500 mA is enough current to power the Edison Arduino board.
View ArticleIntel HD Graphics 4000 - won't update driver
check out this screenshot. http://i.imgur.com/t4vBTn0.png I am convinced i'm downloading the correct driver. Please help. The auto-detect in Windows fails, actually fails with multiple if not all...
View ArticleRe: Yocto Linux start problems
J13 is for thermistor input into the lipo battery charging circuit. The default position (aka thermistor is not connected) is to have pins 2 & 3 shorted together via the jumper. In which J13 jumper...
View ArticleRe: USB 3.0 external Hard Drive not detected after computer starts up, USB...
Littlemic I think it must be a compatibility issue between the Intel controller and Seagate external drives. My Chipset is Z97 but Gigabyte uses the Intel controller version 3.0.0.16 and it works for...
View ArticleRe: I bought an Asus laptop with intel i3 and it FPS for some reason droped
Im currently updating 3d video controller for intel i3/64 bit win 8, is dat good?
View ArticleRe: Let's make pps_gpio work on Quark/Galileo
gigneil gigneil, LDiego_Int Good news, after working on this for a while, I finally got a breakthrough and I'm now able to get a PPS GPIO interrupt working in connecting an Adafruit Ultimate GPS logger...
View ArticleGot GPS PPS GPIO interrupts working correctly on Galileo Gen2 board :-)
Fellow Galileo Makers, I got a breakthrough today and was able to get PPS GPIO interrupts working with a Galileo by doing some minor Galileo kernel modifications to the Galileo Gen2 plaftorm driver...
View ArticleRe: Yocto Linux start problems
In default position pin 2 and 3. DS3 Led is on. In the other position it seems work well but DS3 Led is intermitent..In both positions j2 have 0.6 volts. I´ve checked partitions and i found this...
View ArticleClik here to view.
Re: Issues with i2c on Galileo gen2 board
I tried the same camera module using Arduino uno and i2s scanner sketch was able to detect the device at slave address 0x21.
View ArticleRe: Edison wifi connects, but no status page
I bet you are right, going to flash the edison with the latest and see if what i see jives with the docs.
View ArticleRe: Windows 8.1 and Intel HD 4000: No Advanced mode!
Thank you very much!! It works! I'm using HD 4600 and Geforece 755M Optimus with Dell U2713HM monitor. Currently this is the only way can solve my problem. I'm using HDMI -> DVI-D. Helpfully this...
View ArticleRe: USB Ethernet works! But no IP address via DHCP
really strange. Works fine for me and I didn't really change anything. Maybe some other services triggered by "configure-edison" settings compete with connman on your board?Anyways, can you check your...
View ArticleRe: Building Linux image for Galileo Gen 2 in Ubuntu 14.04
"cleaning up": bitbake -c cleansstate <target> / possibly also delete "build" subfolder
View ArticleRe: Edison wifi connects, but no status page
Indeed, with a new flash complete (v68) everything matches the doc perfectly.
View ArticleD54250WYKH network/pxe boot fail after bios update
Hi, I've having issues booting from network/pxe after updating to bios version 28. I can successfully install windows over pxe if I revert it back to version 21. Bios version tested and failed: 22, 25,...
View ArticleRe: Galileo Debian v1.2 image
StuartAnderson wrote: The instructions in the wiki "How to expand the root filesystem to use the entire SD card" is the easiest way. It uses non-GUI parted utility.I doubt it's the easiest way -...
View ArticleFan control
Hi, I am a video enthousiast and bought a W2600CR workstation for rendering and editing. I am new with server boards. I managed to get the machine up and running. Had a few hickups along the way, but...
View Article