Re: Have ipmi over lan some limitations ?
The NIC speed on the Intel platforms depend on the specific board layouts.Some are Gbit, some are 100Mbit. Assuming you have an Intel board with a 1Gbit shared network connection the total bandwidth of...
View ArticleClik here to view.
HD4600 clone cursor in top left corner when activating quicksync
I'm trying to use quicksync with obs (open broadcast software). But whenever i go to screen settings (through right click on the desktop) and detect monitors, select monitor on hd4600, select try to...
View ArticleRe: DP55WB board UEFI enabled problems
Ir WON'T install on the DP55WB.I managed to install W 7 and W 8.1 by using a thumb disk prepared with Rufus. Otherwise in AHCI mode I can't start from the Windows DVD and in IDE mode the only option...
View ArticleRe: Haswell Refresh & Intel 8-Series Motherboards: it's a shame.
Well count me as one who wants to be able to use the refreshed Haswells CPUs in my DZ87KLT. Please Intel refresh our faith in good customer support.V/R,
View ArticleRe: Intel HD 3000 YCbCr problem.
I stumbled across this thread looking for the same answer. Installed the latest driver today and immediately began experiencing YCbCr not sticking. Unfortunately this problem has plagued "these...
View ArticleRe: HD4000 Driver won't save settings or use profile
I too have an HTPC with HD 3000. Latest drivers continue to have the problem. This is a deal breaker for HTPC. In my situation, I'm using an i5 2500k on an ASUS P8H67-M EVO. The only driver that...
View ArticleRe: Re: Re: Jittery playback from WMC recordings due to known 29/59 framerate...
And here is an original. As long a recording that would fit under 15 MG. 411 ctrl D in WMC will show you the frame rate changes. Right arrow once open 8 times to get to right screen to see frame rate...
View ArticleRe: 4k 3840x2160p in 60hz, anyone succeeded???
ASUS Sabertooth Z87 with the intel hd 4600, windows 8.1, is intel working on a fix for this problem?
View Article3D Model of Galileo2 and a 3D printable base
I was lucky enough to get my hands on a Galileo2 board. I have made a 3D model for those who wish to make cases but do not have a physical board yet. Also, I modified one of the Galileo cases (or just...
View ArticleRe: 3D Model of Galileo2 and a 3D printable base
For those that have a Galileo 1 board. The Galileo is slightly longer, but just as wide. It also moves the Ethernet port to provide more physical clearance for Arduino Shields.
View ArticleRe: [Update] Galileo Gentoo Linux dd-Image freely available - comments welcome
Hello!I try to your Gentoo image. But, not working my Galileo. My Galileo firmware is newest version.Please look following URL gist. This is Galileo Serial Console boot-log. last result is "Error 17...
View ArticleClik here to view.
Re: [Update] Galileo Gentoo Linux dd-Image freely available - comments welcome
I retry your img.please see attached gist.https://gist.github.com/Kazu-zamasu/95c9309d84d681829467do you have any advice?
View Articleproblem trying to build galileo C cross compiler toolchain
I have followed the instructions to build the cross compiler toolchain on Linux (ubuntu).There are errors after running the bitbake command to build a full image (and alsoa spi image), which is...
View ArticleRe: Intel AC7260 limited access after sleep
Hi Joe,Do you have an ETA for an updated driver? You've (and we've all) probably asked this a million times before with the previous driver revisions, but it does give us something to look forward to,...
View ArticleRe: problem trying to build galileo C cross compiler toolchain
Ok, that was fixed by making sure I built on a rw filesystem (my setup uses a VM and I was building on a OSX host partition, which was read only). NowI get a little further, but still no cigar. I am...
View ArticleIntel DZ87KLT-75K with I7-4790K
Hi. I have just bought Intel DZ87KLT-75K with I7-4790K and it´s impossible start the BIOS. No video signal, nothing happens. I don´t know how to solve this problem.Please, anybody can help me?
View ArticleRe: problem trying to build galileo C cross compiler toolchain
Ok, getting a bit further. For some reason (maybe I missed a command), the conf/bblayers.conf did not have all the directories inthe BBLAYERS variable. I fixed this by looking at my previous failed...
View ArticleRe: Intel® NUC Kit D34010WYK Power Button
Hi, I've just returned from holidays, and noticed a BIOS v0027 update has just been released. I updated OpenElec to v4.0.7 as well. Well, either one of the two updates (or both) made my power button...
View ArticleRe: NUC Haswell reboots after shutdown
Hi, A new bios v0027 has just been released. Please, test it, as it seems to fix my two problems: reboot after shutdown and power button not working for power up. I'm not 100% sure it fixed both...
View Article