Re: DH87RL 3 Beep POST After BIOS Upgrade

Hi Paul,

I recommend you doing some steps first:

1. Take the board outside of the chassis and disconnect all components from it.
2. While having the board in a non-conduct surface, remove the Bios Jumper and also the battery.
3. Leave the board in this state for about 20-30 minutes.
4. Reconnect the system with the minimum configuration. I mean 1 memory stick, 1 HDD etc…
5. Once you have minimum configuration, proceed with the Bios recovery options available here:

http://www.intel.com/support/motherboards/desktop/sb/CS-023360.htm?wapkw=(Bios+recovery)

In the case that the issue persists, I recommend you contacting the place of purchase for a possible replacement of the board due to the bios problem or you can contact your Intel® local support.