Hi,
I tried to migrate data from the internal SSD (125G) drive of a toshiba ultra book (OS: win7) to a new intel 525 (240G)
and Acronis' "Intel Data Migration Software" always failed by restarting in the middle of the process with no error message.
After the error I did several attempt to exclude other problems lead to erroneous behavior:
- Run check disk on the source partition - no issue found
- Partitioned the target SSD (connected by the USB-to-SATA adapter) and tested, run diagnostic - no issue found
- De-fragmented to source disk
- Tried the migration with a recommended USB2 frame (SAT2510BU2E - JMicron chipset) - same error with longer time estimates
How to reproduce:
The wizard recognized both of the disks and let start the migration; then Acronis' system booted and displayed "2 of 5 steps; 8 minutes remaining".
After changing to 7 minutes, suddenly the time rises to 7 hours and restarted; after the restart only the first partition is copied, the rest of the disk was not partitioned.
Problematic configuration:
Toshiba Z830 (USB 3.0 controller: Renesas Electronics)
Delock mSATA to SATA adapter
Chieftec enclosure (GL3310 controller)
msata SSD: Intel 525