Hello,
From the Intel® wireless adapter properties you may want to check the following:
- 802.11n Mode: Enabled
- Preferred Band: Choose the desired option 2.4 or 5.2 GHz
What are the recommended settings for 802.11n connectivity?
http://www.intel.com/support/wireless/sb/CS-030709.htm
In regards of security and encryption we recommend WPA2-AES instead of TKIP or WEP as described in the article below.
Data rate will not exceed 54 Mbps when WEP or TKIP encryption is configured
http://www.intel.com/support/wireless/wlan/4965agn/sb/cs-025643.htm
Please also note that your wireless AP is simultaneous dual-band so, it is possible you will only see one SSID. You may contact the router manufacturer for assistance setting it up.
http://support.linksys.com/en-us/support/routers/EA4500
The CMD command netsh wlan show interfaces can be used to get more information from the network you are connected to.
NOTE: These links are being offered for your convenience and should not be viewed as an endorsement by Intel of the content, products, or services offered there.