I was told to add the 100mb boot partition to the main partition with this:
http://www.sevenforums.com/tutorials/209885-bootmgr-move-c-easybcd.html
Then you just swap out and follow the below commands , i re installed windows onto the new SSD and it's working great . Be sure to download Intel's toolbox to align and optimize after the re install.
1. Replace the HDD with the SSD
2. Use command prompt from any Windows installation or recovery disc and define an aligned primary active partition on the SSD. The commands are:
Diskpart
List disk
Select disk n(where n is the number that was given for your SSD in List disk)
Clean
Create partition primary align=1024
Format fs=ntfs quick
Active
Exit
3. Restore the image you have into that partition.
The procedure that Intel gives you is a full OS migration scenario. But since you have an image, you can do the above just as well.
